Spotless 2.0 by CarPro

Spotless’s proprietary blend of carefully balanced acids safely breaks down mineral deposits on most hard materials, and can even be used on CQUARTZ coatings, helping you keep your vehicle spot-free.

• Safely neutralizes hard water spots and stains on plastics, emblems, glass, paint and modern wheels with a clear coat.
• Essential for preparing matte paint for coating and/or maintenance.

For Bodypaint:

• Wash the vehicle with Reset, and rinse and dry the paint.
• Work indoors or in the shade on cool panels.
• Prepare 2 damp Terry Weave Towels.
• Spray Spotless 2.0 directly onto the panel or into 1 damp Terry Weave Towel and spread on the affected area.
• Allow 30 seconds to 1 minute for Spotless 2.0 to break down the minerals on the surface before wiping the affected area to help loosen the mineral deposits.
• Do not let the chemical dry on the surface, wipe off with a 2nd damp Terry Weave Towel or apply Spotless 2.0 again.
• Repeat if necessary.
• After cleaning each panel, thoroughly rinse the panel with running water and dry it before moving to the next panel.

For Emblems and Wheels:

• Clean the area with Reset, rinse and dry the surface.
• Always test in an inconspicuous area first. Spray Spotless 2.0 onto an applicator, microfiber or brush of your choice and apply to the affected area 1 section at a time.
• Allow Spotless 2.0 to dwell on the affected area for 30 seconds to 1 minute without letting it dry before agitating to help break up the mineral deposits or stains.
• Repeat if necessary.
• Rinse thoroughly with running water after cleaning each area and dry.

Textured Plastics:

• Clean the plastics with Reset, rinse and dry.
• Spray Spotless 2.0 directly on the textured plastic or apply to a damp microfiber towel and wipe it onto the surface generously to allow it to get into the pores.
• Allow Spotless 2.0 for 30 seconds to 1 minute to break down the mineral deposits and contamination before using a detailing brush to agitate and work the contamination out of the pores.
• Repeat if necessary.
• Rinse thoroughly with running water after cleaning each section and dry.

For Glass:

• Apply Spotless 2.0 onto effect glass with a Terry Weave Towel and allow to dwell for 30 seconds to 1 minute.
• Use the same Terry Weave Towel to polish the glass to agitate the minerals or for stubborn water spots apply some Spotless 2.0 to a polishing pad and polish the glass by machine or by hand.
• After spot removal thoroughly rinses the glass and adjacent panels with running water or wash with car shampoo and dry.

Tips and Tricks:

• Identify water spots by water clinging to painted surfaces such as very slow sheeting or droplets catching on the panel, wipe the surface lightly with a damp microfiber towel and look for the outline of spots (also works for glass) using indirect light.
• Always work with cool panels out of the sun and wind.
• Keep the working area small, and complete cleaning section by section
• Allow the product to dwell on the affected area without drying for maximum efficiency of breaking down the contamination
• Be careful of spray mist that may drift on to adjacent panels or glass.